 Introduction This is a review for the Hawkeye Firefly 2 Micro Action Cam specifically used for recording HD footage on FPV quadcopters The ability to capture high definition footage for your own use or sharing with others is a key part of the FPV hobby. GoPro have had this market stitched up but are expensive especially now that the session series have been discontinued. The Runcam split, Caddx Turtle and now Foxeer Mix series have been great especially for smaller light quads but your HD recording is then fixed to a specific quad. Last year the Hawkeye Firely Micro Cam was released and had it's niche as a lightweight self-powered transfereable action came but it was forgettable with poor bitrate on 1080p footage which typically looked worse than 720p. Well the makers from this camera have made real improvements for version 2 which offers the specs below, key of which for me is 1080p @ 60fps (spoiler: it's pretty good) and 2.5k @ 30fps all with its own battery that will power all 31g of it for about 60 minutes.
This is the new Hawkeye Firefly 2 Micro action cam that was released April 2019 Getting started The camera itself is small and feels solid but is definitetly not water resistant in it's own right. Water resistance is achieved using the included silicon 'condom' which securely fit on the camera covering potential ingress points: button holes, LED hold, SD card. Only the sealed lens and sealed rear of the camera are exposed. Buttons are easily accesible with recessed button markings in the silicon skin that align perfectly with the actual buttons on the camera. Another thing, with the silicon skin on it actually weights 43g. Regardless I'll only be flying with this on, it offers good physical and protection and some basic water resistance.
5 Comments
|
