QUADIFYRC.COM
  • RC Cars
  • Car of the Month
  • Quad Reviews
  • COUPONS AND DISCOUNTS
  • About & Contact

QUADIFYRC Quadcopter reviews

FRSKY Taranis X-Lite Full Review: Throw it in your pack and go.

4/9/2018

2 Comments

 
PictureA controller that doesn't dwarf my micros!
I've had the Taranis X-Lite controller for 2 months now and in that time many reviews have been published, each adding to the information available in the public space. I have made sure I've spent a decent amount of time with this controller before writing my review and as a sneak preview I've sold my Taranis QX7s such is my impression of this controller. I've found that the universal comments that resonate with me are:
  • Build quality is top notch
  • Gimbals feel great but are smaller than the X9D or QX7 but similar in size to FRSKY, Jumper Series.
  • Auxilliary switches are smaller and stiffer
  • Menus are easy to navigate
  • Standard JR modules such as crossfire that physically fit the X9D and QX7 do not fit the X-Lite although a specific multiprotocol and long range R9M module does

PictureAs a thumber my hands and fingers fall into a naturally comfortable position
I am a thumber I don't care if I can or can't pinch
Let's face it, it's no surprise that this controller has taken design cues from console controllers to target those who have grown up with a controller in their hands. Further more it is suitable for any 'thumber' like myself where your hand naturally fall into a comfortable position with all controls and switches in close proximity. I'm all for the omission of a neckstrap because the weight, size and way you hold makes it unecessary in mind. What if you're a pincher? This review probably isn't for you because I can't empathise but there is no common opinion on whether this will suit you or not. For example two reviews I have a tremendous amount of respect for (NJTech and NickBurnsRC) have opposite ideas on suitability for pinchers. Check out their youtube reviews for more. All I can say is that it is excellent and feels natural for someone who has only ever been a thumber.

Open TX is the operating software
The Taranis X-Lite runs open TX which is the most common transmitter software in FPV (The Flysky Nirvana and new Jumper Radios use open TX too). The X-lite runs the latest version 2.2.2 and find navigating easier than on the X9d or QX7 with the new 'nub' control. I won't cover Open TX here but for those familiar with the system there are no surprises here. The latest version of Open TX for the X-Lite can be found here
I now have a better appreciation for the battery size
When the X-lite was first released everyone was upset about it using 18500 batteries instead of the more commonly available 18650. 18500 batteries were not as common but have now popped up in most stores like Gearbest, Banggood, Piroflip etc. Since battery shipping is still dicey I found an option to use "AA" sized 16500 batteries in my X-lite in this blog. I can now appreciate FRSKY's no compromise approach to choosing the 18500 over the 18650 - it is much more compact especially when considering the batteries used in the QX7 and X9D. Below is a picture of how the X-lite would have looked if they'd gone with 18650 batteries - awkward. Here is the link to thingiverse however if you wish to print.
Picture
Taranis X-Lite with 3d printed battery caps to fit 18650
Picture
Taranis X-lite with stock battery caps for 18500 batteries
It is so portable!
Unfortunately the thumbing/pinching has dominated discussion on this transmitter (at least in reviews) that many tend to gloss over what I believe is the strongpoint that sets it aside from most controllers out there - it is very small and very portable. My last controller was a Taranis QX7s which is up until recently has been the most popular transmitter, particularly in the cheaper QX7 form. Although it is an excellent controller, it is large in size (especially if you fly mostly micros!) and it is not especially robust, particularly the auxilliary switches. Really it needs to go in a protective case first and then in your backpack where it tends to take up most of the room. In contrast the X-Lite is small and even if you use the protective case it still doesn't take up much room. Furthermore the Aux switches are smaller, stiffer and overall stronger meaning if you can find a way of protecting gimabls and the screen you could chuck this straight in your backpack without any other protection. Gimbal protection is included but these are loose and would easily come off if the controller was placed directly in your bag. I've recently ordered the "Realacc Stick Rocker Protector & Screen Guard For FrSky Taranis X-Lite" from Banggood which is a 3d printed minimalist gimbal - screen - joystick protecter that *should* allow me to place this directly on the bag and leave a helluva lot more room.

​It's worth noting the space and portability was a big reason I preferred Aomway Commanders over box goggles (blog here) and saving room with transmitter is similarly important now I know firsthand what a benefit this is to me. 
Picture
Picture
Finally my controller doesn't dwarf my whoop!
Picture
The X-Lite comes with a nice padded case that is compact and can hold a few extra essentials
Picture
3 way switches are compact and have little chance of breaking even if left floating in your bag
Picture
Ditto with the 2-way switches
Picture
I have one of these $5 gimbal/screen protectors on the way so I can just throw the controller in my bag
It takes time to adjust but performs really well
It's no lie saying that my flying was significantly worse than usual when I started out with the X-lite because it felt unfamilar. Yes the gimbals are smaller and yes the have shorter throw. What this meant in the first few packs there was a lot of over correction because it makes you feel like you are running higher rates. Don't adjust any settings though because your brain will adjust and correct. Now I genuinely prefer the X-Lite after this adjustment phase becaue I could never reach full deflection comfortably with the QX7s but can with the X-Lite - I get to make use of the entire gimbal. Bottom line - stick with it, it will feel awful at first but you'll soon come right.

And on to the switches - they are bloody brilliant. They have a much more positive 'click' than other taranis radios and much shorter length meaning no accidental switch flicks plus they will be way more robust (I broke several switches on the QX7s). All four are much easier reach from your index fingers. The practical outcome for me is a can disarm just off the ground during landing rather than trying to land, boucing because of airmode and the disarming... a minor quibble no doubt but definitely still an advantage. There are 4 switches in total - top left and right are 3-way and bottom left and right are 2-way. You can swap these out for other variants including momentary switches if you want. Lastly there are 2 slider style potentiometers (pots) for progressive rather than binary control over gimbals, servos and the like. For most FPV quadcopters these will not be used.
Picture
Switches are much closer to inactive fingers making disarming much fast and more natural.
It has a proprietary expansion port
Historically most modern radios including the Taranis range (X9D, QX7) have used the JR expansion port for additional functionality. This includes multiprotocol modules such as the MTX9D and IRange-X IRX4 Plus for control over other receivers and the TBS Crossfire module for a long-range 900MHz control link. For reasons that are becoming clearer now this has changed on the X-Lite. The module is smaller in size and profile and is unique to the X-Lite. At this stage only 3 modules fit the X-lite - the Vantax MPM Lite multiprotocol module, the IRange-X IRX4 Lite multiprotocol module and the FRSKY R9M slim long-range 900MHz control link. The TBS crossfire modules do not physically fit BUT since the pin out is the same, some clever cookies have made 3d print designs that allow the crossfire module to connect to the X-Lite ableit a little ungracefully. As a side note I have a $6 multiprotocol module that I will look to adapt to my X-Lite in order to control my NFE silverware bayang protocol micro brushed quads.
Picture
Vantac MPM Lite Multiprotocol Module for the X-Lite
Picture
IRange-X IRX4 Lite multiprotocol module for the X-Lite
Picture
FrSky R9M lite long range module for the X-Lite
Picture
Picture
It's really easy to recommend this to a thumber
For a long time there was a lot of hype around project dark knight (now FLYSKY Nirvana) which was due to be the spiritual successor to the Turnigy Evolution. However, the Taranis X-Lite has come out of nowhere with a set of features comparable to the best Taranis controllers in a smaller package at an extremely competitive price and so has kind of knocked the stuffing out of the Nirvana launch. It's a simple upgrade for many in the FRSKY ecosystem because we can use the same receivers which on the whole are the smallest, cheapest and best performing - e.g. the XM+ with excellent range at aroung 1g can be had for around $9 at Hobbycool. The controller is so easy to like and obviously a lot of work has been put in by FRSKY to make this an extremely competitive price - it is only $20 more than their entry level QX7 and includes the much more expensive Hall-effect gimbals as standard rather than an upgrade part.

If you are a thumber or are coming from a game controller I would recommend this highly as a first (and last) controller. Likewise I would strongly recommend this as an upgrade from any other controller especially if you are looking for better portability.
Quick note on the FLYSKY Nirvana
This looks like an excellent controller but is $40 to $50 more expensive that the X-Lite. It has support for a standard sized Crossfire module, better grip options for pinchers and a more colourful touch screen display. It is bigger though - closer to the QX7 in size than the X-lite. If these things are important to you, consider the Flysky Nirvana but if they are not (like for me) then go with the X-lite if you are looking for a console controller style of remote. One potential downside of the Nirvana is that is uses flysky receivers by default which have historically been lacking in features (RSSI, Telemetry) and range although this will supposedly be rectified soon. If you have come from FRSKY though it would mean a full set of new receivers rather than just a re-bind.
Please note this Taranis X-Lite was kindly provided by Gearbest.com. If you find this review help you in your decision to purchase, please consider purchasing from them at this link
Accessories currently available for the X-Lite
Picture
​Transmitter Neck Strap Hook for FrSky Taranis X-LITE 

​$7
Picture
FrSky R9M Lite 900MHz Long Range RC Drone Transmitter Module for Taranis X-Lite

FRSKY long range module made especially for the X-Lite
Picture
2 PCS 3.7V 1500mAh 18500 Li-ion Battery for Frsky X-Lite Radio

Rechargable Li-Ion batteries for your X-lite ($10 pair)
Picture
Realacc Stick Rocker Protector & Screen Guard For FrSky Taranis X-Lite Remote Control Transmitter.

Fairly self explanatory. Only $5
Picture
X-Lite Transmitter Parts BRACE Lite & Long+Short Gimbal Stick Ends

The brace allows you to fit a neck strap and the stick ends give you more flexibility. $26is a bit steep?
Picture
Realacc X-lite Transmitter Edition RC FPV Racing Drone Shoulder Bag

This as been designed to fit the X-lite and a binocular pir of goggles like the Fatshark, Aomway Commader, Skyzone Sky02, Eachine EV200D etc.
Picture
Vantac MPM Lite 2.4G Multiple Protocol TX Module for Frsky X-Lite

This is a bit expensive at $49
Picture
IRangeX IRX4 LITE CC2500 NRF24L01+ A7105 CYRF6936 4 IN 1 Multiprotocol TX Module for Frsky X-lite

This multiprotocol module will let you control practically anything including toy quads. Much better price at $35
Note: Any replacement parts can be purchased from HORUSRC.com
2 Comments

    Quick Access Menu

    All
    1103
    1104
    1105
    1106
    1204
    120rs
    1505
    20mm
    2207.5
    2508
    2.5 Inch
    2 Inch
    2s Whoop
    3 Inch
    4s Micro
    5 Inch
    6s
    7500kv
    7 Inch
    Action Cam
    Adapter
    AIO
    AirA
    Antenna
    Aomway Commander
    Ascent
    Asteroid
    Babyhawk R
    Battery
    Beebee 66
    Beeper
    Bench Review
    BNF
    Boldclash
    Bolt
    Brushless Whoop
    Budget
    Build
    Canopy
    Charging
    Christmas
    Cinewhoop
    Cloud 149
    CM275T
    Cobra
    Comet
    Crossfire
    Crux3
    Diatone
    Drone
    Dvr
    DYS
    Eachine
    Eachine Cvatar Cinewhoop
    Eachine Shadow Fiend
    Eachine Tyro79
    Eachine Vrd3
    Emax
    ESC
    F02h
    F3
    Fatshark
    Fatshark Attitude V5
    First Flight
    FlexRC
    Flight Controller
    Flyfox 110
    Fpv
    Frame
    Freestyle
    FRSKY
    FRSKY X-lite
    Ft5
    Full Speed
    FUS Spartan
    FUS X111 Pro
    Gemfan 2540
    Goggles
    Goggle Strap
    Happymodel
    Hawk 5
    Hawkeye Firefly 2
    HB64
    HD Footage
    HGLRC
    Hobbycool
    HobbyCool.com
    Iflight
    Isdt
    JHEMCU
    Jr Port
    Jumper T8SG
    Komori
    Lal5
    Larva-x
    Leader 120
    Leader 2.5
    Leader 3
    LED
    Long Range
    LST S2
    Micro Quad
    Mobula
    Mobula7
    Motors
    Namelessrc
    Novice-i
    Oled
    ORT Dual Shield
    PIDs
    Pnp
    Portable
    Propellers
    R249+
    Racerstar
    Radiomaster TX16s
    Ready To Fly
    Red Devil
    Review
    Roma F4
    Roma F5
    Runcam
    Runcam 5
    Rush
    Sailfly X
    Sailfly-x
    Shootout
    SKY03O
    Skystars
    Skyzone
    Smart Audio
    Snapper7
    Sweet Spot
    Taranis
    TBS Tango2
    Tinyleader
    Tiny Tank
    Tmotor
    T-motor
    Toothpick
    Toothpick Pro
    TP3
    Transmitter
    Trashcan
    Tutorial
    Twig
    TX01
    Upgrade
    V1s
    Vtx
    Whoop
    X120
    X Lite
    X-lite
    ZJWRC 115X

Thanks for visiting QuadifyRC.com Follow us on facebook below to get all the latest updates
  • RC Cars
  • Car of the Month
  • Quad Reviews
  • COUPONS AND DISCOUNTS
  • About & Contact