Emax Hawk 5 VTX upgrade tip - POwer Supply

To those of you that choose to upgrade the vtx in your hawk 5, like I did with the AKK infinite VTX/DVR (in this walkthrough here) I've updated my recommendation for the powersupply. Previsouly I relied on the flight controller's 5v BEC circuit that also powers the receiver and of course the board itself. I've now updated this recommendation to use the VBAT (or VCC) power supply instead assuming of course your VTX can take up to 24V as most modern full-sized VTXs can, including the AKK infinite I installed. This is because the BEC struggles at higher output making the video feed noisy. Over the longer term this is likely to irreversible damage the BEC rendering the flight controller pretty well useless but not before having random failures as a result of the compromised BEC. Picture below is using the power supply from the original VTX - the flight controller's 5V BEC:

Read More