The HS10422 HS10423 HS10424 is a large 1/8 scale 2WD RC Truck that includes everything needed to run (including battery and charger). It is the cheapest truck of this size by a long shot so I decided to check it out to see if it is any good. I'll cover in a LOT more detail below but I came out of the review phase thinking this is the best big beginner car by some margin. When I first saw this car I had to double take - a 1/8 truck for $120 (or much less on promotion) is pretty crazy. On closer inspection this had proportional servo steering, a full 540 sized brushed motor with electronic speed control and even includes and battery and charger. No matter which way you cut it that is an awful lot of car for the money. Now that I've had a chance to play with this for the last month or so I can confirm the size is REALLY impressive - check it out compared to some of the popular WL toys car below too. I've obviously had a chance to gauge it's performance, durability, battery life and more as well as taking a closer look at the design and build. Read on to find out more plus my conclusions and recommendations.
The WL Toys 104001 is an all new 1/10 scale 4wd ready to run RC car from WL toys. This is a follow up to the tremendously popular 1/14 scale 144001 and 1/12 scale 124019 (review here) cars. Unlike those two cars (which were essentially the same) this one is new from the ground up. It is more expensive at around $140-150 but is it worth it? Read on to find out. My car was ordered from Banggood and was received early April 2021 and if you get as far as the end of the article you'll find an exclusive QuadifyRC voucher for 14% off limited to 50 units If you have not come across my site before then welcome! I feel I am well qualified to review this car because after stepping away from RC racing over 20 years ago I have gotten back into RC cars by way of the WL toys 144001 and 124019 for which I have written reviews and over 20 upgrade guides to, all of which can be found here. Compared to youtube reviews which focus on entertainment, I'd like to think I can go more in depth as the format of traditional blogs like mine tend to suit a technical deep dive better. But if you want quick feedback then feel free to jump to the conclusions below.
The WL Toys 124018 is a 1/12 scale off road 4WD ready to run radio controlled car with a desert-truck look. It shares over 90% of its parts with the hugely successful 124019 (and 144001) buggies but there are several key differences. In this article I'll dig in to the differences and why they add up to more that just the look of the car. Before you go any further please look at my 124019 review here. Rather than rehashing the same detail here I'll just focus on the differences in order to keep focused so I'll wait here patiently while you read that first...
The SG 1603, SG 1604 and UDIRC 1601 are small 1/16 scale 4wd on road cars designed for skids on any smoothish surface. They are extremely durable and the edgy body shells (SG 1603 Hoonitruck/Infraction and SG 1604 Moke) being the only thing that separates these two. Here I've reviewed the SG 1604 Moke and have written a setup guide on how to greatly improve performance by fixing the errors out of the factory Before I start this review I'll note that this car from "SG" is supposedly the same company that made the SG 1601 and SG 1602 4wd 1/16 brushless truck which won my budget RC basher of the year award for 2020 here. In addition my review and follow up can be found here and here. Thus is was with great expectation that I have reviewed this car.
DumboRC have a range of very similar 2.4GHz digital surface radios (for RC car and boats) with subtle differences which makes them confusing to buy. All of them around around the $30 mark which makes them extremely good value if you know how to pick the right set of features for you. In this guide/review I'll break down the differences and review the two variants that I recommend - namely the DumboRC X6 2.4G 6CH Transmitter and DumboRC X6A 2.4G 6CH Transmitter with X6FG Receiver and will of course review them and give you my recommendations.
The WL Toys 124019 is a 1/12 scale Ready To Run (RTR) radio controlled 4wd off road buggy which I will be reviewing in-depth for this article. It is an evolution of the hugely popular WL Toys 144001 1/14 scale which it shares over 95% of it's part with. It's also the same under the hood as the 124018 sand buggy. I have a lot of experience with these series of cars having written over a dozen guides which can be seen here so apologies in advance if I get a little technical (skip to the conclusions if needed!). WL Toys scored massive success with the 1/14th scale 144001 which based heavily on the LC racing EMB-1 and released in early 2019 - it was well made with good components as well as being fast and durable. Perhaps more importantly it hit a great price point of $80-100 USD. With popularity came a large amount of upgrade parts and people like me have taken this further to adapt brushless systems to suit this car for off-road fun and even for speed run build capable of 80-100mph. The 124019 is the subject of this review though and in essence this is just the same as the 144001 except for a wheelbase that has been stretched by 45mm. This is at least how it looks on the surface but there are a number of key improvements that many have missed and these have addressed: motor overheating, differential durability, chassis stiffness and wheel security. I'll cover these all in detail here plus feedback on the cars performance, handling and durability as per a typical review.
With the boom in popularity of the WL Toys 144001 1/14 scale RC buggy, there are a lot of aftermarket parts available now, all of which are currently available at here. For this article I'll be looking at why I chose the metal upgrade parts I did, how to install and my thoughts on the parts I did install. These upgrades are also applicable to the extended wheelbase 124019 which is identical other than the length Don't forget to check out the other guides and reviews I've already written for the 144001: The first thing you probably think of with metal parts is that they will be stronger than the plastic parts they replace. Although this is true, strictly speaking, the stock plastic pieces do have advantages in some situations, specifically -
Recommended parts:
I've specifically avoided these parts below because I think they will reduce net durability for reasons explained underneath the images. If you are just going for looks however they do still look great! Parts I recommend against:
Plus other parts available with my comments
|
Categories
All
|