# version
# Betaflight / MATEKF411 (MK41) 4.1.1 Nov 15 2019 / 12:34:58 (1e5e3d369) MSP API: 1.42

# start the command batch
batch start

# reset configuration to default settings
defaults nosave

board_name MATEKF411
mcu_id 002a002d3439511136383737
signature 

# name: FUS-RC

# feature
feature -SOFTSERIAL
feature -TELEMETRY
feature MOTOR_STOP
feature LED_STRIP

# beacon
beacon RX_SET

# serial
serial 0 8192 115200 57600 0 115200
serial 1 64 115200 57600 0 115200

# led
led 0 5,7::C:1
led 1 6,7::C:1
led 2 7,7::C:1
led 3 8,7::C:1
led 4 9,7::C:1
led 5 10,7::C:1
led 6 11,7::C:1
led 7 12,7::C:1
led 8 13,7::C:1

# aux
aux 0 0 2 1975 2025 0 0
aux 1 0 0 1975 2050 0 0
aux 2 13 0 1475 1525 0 0
aux 3 35 0 1950 2050 0 0

# master
set dyn_notch_width_percent = 0
set dyn_notch_q = 250
set acc_calibration = -76,-10,-420
set baro_hardware = NONE
set min_check = 1020
set max_check = 1980
set rssi_channel = 16
set dshot_idle_value = 450
set motor_pwm_protocol = DSHOT300
set beeper_dshot_beacon_tone = 2
set small_angle = 180
set osd_warn_rssi = ON
set osd_rssi_alarm = 70
set osd_vbat_pos = 450
set osd_rssi_pos = 2481
set osd_tim_1_pos = 470
set osd_tim_2_pos = 2551
set osd_flymode_pos = 34
set osd_throttle_pos = 2529
set osd_current_pos = 2496
set osd_mah_drawn_pos = 2508
set osd_craft_name_pos = 2060
set osd_avg_cell_voltage_pos = 2473
set osd_disarmed_pos = 2314
set osd_stat_rtc_date_time = ON
set osd_stat_max_spd = OFF
set osd_stat_endbatt = ON
set osd_stat_battery = ON
set osd_stat_bbox = OFF
set osd_stat_bb_no = OFF
set vtx_freq = 5880
set vcd_video_system = PAL
set name = FUS-RC

profile 0

profile 1

profile 2

# restore original profile selection
profile 0

rateprofile 0

rateprofile 1

rateprofile 2

rateprofile 3

rateprofile 4

rateprofile 5

# restore original rateprofile selection
rateprofile 0

# save configuration
save