# version # Betaflight / MATEKF411 (MK41) 4.1.1 Nov 15 2019 / 12:34:58 (1e5e3d369) MSP API: 1.42 # start the command batch batch start # reset configuration to default settings defaults nosave board_name MATEKF411 mcu_id 005d00563439510637393937 signature # name: FUS-RC # feature feature -SOFTSERIAL feature -TELEMETRY feature MOTOR_STOP feature LED_STRIP # beacon beacon RX_LOST beacon RX_SET # serial serial 0 8192 115200 57600 0 115200 serial 1 64 115200 57600 0 115200 # led led 0 7,8::CB:6 # master set acc_calibration = -156,49,-860 set baro_hardware = NONE set dshot_idle_value = 350 set motor_pwm_protocol = DSHOT600 set small_angle = 180 set osd_vbat_pos = 2497 set osd_tim_1_pos = 2518 set osd_flymode_pos = 2081 set osd_craft_name_pos = 2507 set osd_avg_cell_voltage_pos = 2465 set name = FUS-RC profile 0 profile 1 profile 2 # restore original profile selection profile 0 rateprofile 0 rateprofile 1 rateprofile 2 rateprofile 3 rateprofile 4 rateprofile 5 # restore original rateprofile selection rateprofile 0 # save configuration save